Cellphone-Mate CM2000-WL 55/60dB Dual Band SOHO Amplifier Kit V3.0
Cellphone-Mate CM2000-WL 55/60dB Dual Band SOHO Amplifier Kit V3.0
Dropped calls? Boost and increase your cell phone reception with this complete system: Cellphone-Mate CM2000-WL 55/60dB Dual Band SOHO Amplifier Kit V3.0! CellPhone-Mate has been known for their state of the art wireless communication technologies which have improved and changed the quality of conversation for countless numbers of people.
Whether you're at home or at the office, as long as there is low signals, the Cellphone-Mate CM2000-WL 55/60dB Dual Band SOHO Amplifier Kit V3.0 provides a sizable indoor coverage for most home and office environments.
Do you need custom designed amplifier system at your place? Fill out AccessoryGeeks Cell Phone Signal Site Survey right here.
Kit is best for:
[ House - Office - Warehouse - up to 3,500 sq feet ]
Dual Band Coverage for most US Cell PhoneProvider (T-Mobile, AT&T, Verizon Wireless, Sprint, etc - excluding Nextel iDEN)
Wireless operation with multi user support
Improve data card and broadband signals too
No technical experience required - Plug-and-play style installation / AccessoryGeeks' Cell Phone Signal Booster Installation Guide provided
Better signal mens longer battery life
Attractive, sleek design
FCC approved
*Life Time Warranty available with Cellphone-Mate
Model #: CM2000-SOHO-V3
Optimal Operation Requirement for any Cell Phone Signal Boosters
Distance of separation for Cell Phone Signal Booster
Signal availability outside your home/office/warehouse (at least 1 or 2 bars, 3 bars to be optimal). Remember, no signal outside = no signal inside even with amplifier
INSTALLATION DIAGRAM
Cellphone-Mate CM2000-WL 55/60dB Dual Band SOHO Amplifier Kit V3.0 includes:
1x CM100-S outdoor omni-directional antenna
1x Cellphone-Mate CM2000-WL 55/60dB Dual Band SOHO Amplifier V3.0
1x Cellphone-Mate CM222 3dB Indoor Dome Antenna
1x
Cellphone-Mate CM240 Ultra Low-Loss Coaxial Cable CM004-40 (40 ft)
1x Cellphone-Mate CM240 Ultra Low-Loss Coaxial Cable CM004-20 (20 ft)
All mounting hardware
AC power supply
Need more help?
AccessoryGeeks Exclusive Cell Phone Signal Booster Installation Guide
AccessoryGeeks Exclusive Cell Phone Signal Booster General Package Content Guide
General specifications For Wilson In-Building Wireless Signalboost DB Pro 62db
Frequency range: Uplink: 824-849 and 1850-1910 MHz / Downlink: 869-894 and 1930-1990 MHz
Standard supported: All major standards include: CDMA, GSM TDMA and AMPS etc
Gains: Variable - maximum 55 dB
Maximum RF output power: 3 watts
Impedance: 50 ohms
Noise figure: Maximum 5 dB
VSWR: Typical value 2:1
AC Power transformer: Input: AC110V, 60Hz; Output: DC5V
DC power adaptor: No
Antennas: Dual band linear antennas, with maximum 3dB directional gain
RF connectors: SMA connectors on both ends (adapts to FME and N type)
Power consumption: <25W
A BRIEF INTRODUCTION
Reference [ CELL SIGNAL CALCULATOR ] & [ FAQ - A.G. AMPLIFIER'S GUIDE ]
What is the Distance of Separation required for a Cell Phone Signal Booster?
Distance of separation is the separation needed for an amplifier kit to work properly. If the distance of separation is too short, the amplifier kit will not work to its fullest potential. Think of it as microphone feedback; when you place a microphone too close to the speakers it will give you a screeching noise feedback. Keep in mind that a vertical separation (diagonally going up) helps shortened the total distance of separation required. Refer to the table below when designing your kit.
Amplifier Type
Distance of Separation
Best Application
Look for these icons
40dB
5-10 feet
Car or desk space
45dB
5-15 feet
Car, truck, or desk space
50dB
40-45 feet
Small office, 1 room in the
55dB
45-55 feet
Small office, 1 room in the house, trailers, or boat
60dB
50-60 feet
Office, large room, small warehouse
62dB
60-70 feet
Office, large room, small warehouse
65dB+
70-100 feet
Large office, mansions, or warehouse
This particular kit requires at least 45-55ft of separation like shown on the diagram below:
Cellphone-Mate CM2000-WL 55/60dB Dual Band SOHO Amplifier Kit V3.0
TIDFV
Disclaimer:
Cell phone signal boosters only work in situations where there are traces of signals. Systems will not work if zero signals can be picked up.
Accessorygeeks.com is not responsible for loss or damages caused by delays in delivery from natural disasters, manufacturer delays, acts of
war or other causes beyond our control.
- Dual Band Coverage for most US Cell PhoneProvider (T-Mobile, AT&T, Verizon Wireless, Sprint, etc - excluding Nextel iDEN)
- Wireless operation with multi user support
- Improve data card and broadband signals too
- No technical experience required - Plug-and-play style installation / AccessoryGeeks' Cell Phone Signal Booster Installation Guide provided
- Better signal mens longer battery life
- Attractive, sleek design
- FCC approved
- *Life Time Warranty available with Cellphone-Mate
- Model #: CM2000-SOHO-V3
Order the Cellphone-Mate CM2000-WL 55/60dB Dual Band SOHO Amplifier V3.0 - Is Available Now! today! Don't miss out on this great deal with free shipping! The Cellphone-Mate CM2000-WL 55/60dB Dual Band SOHO Amplifier V3.0 - Is Available Now! is ready to be shipped within 24-48 hours!