Motorola RAZR V3 Standard Pink Protective Cover / Case

Hard Plastic Cases Installation Video Transcript:
Hello, this is Mario from AccessoryGeeks.com
And today I will show you how to put on a plastic protective case on iPhone first generation.
As you can see this is the product.
This is one of the colors that we have at AccessoryGeeks.com
Well, before we install or remove any of the product.
We recommend you having a phillips head screw driver and a pry tool to remove it later.
Both of these products are available at AccessoryGeeks.com
I will now open the package.
And these are the components of the product.
You have the front and the back casing.
There’s 3 parts to this which is the base for the clip, the screw for the clip, and a cushion to protect it from scratches, or scratching your phone actually.
And this is the plastic clip itself.
Also before you actually put on your case, I would recommend you to clean your phone first.
So, you would avoid any debris on your screen.
Over here you see a hole, a square hole, and this is where the base go.
And it’s up to you whether to install it or not.
I personally didn’t have it on because I didn’t like having the belt clip on, ‘cause I don’t put it on my waist.
But if you do want to install, and this is how you do it.
You take the base, align it on the square.
Just hold it firmly.
Take this screw and you screw it on there.
Not to tight, as long as it’s not moving.
The cushion’s purpose is to…
You place it there, this is like a sticker, you place it there so it doesn’t give scratches to your…
It prevents scratches given to your phone.
‘cause you know, when you take it off when you’re bored with the case or you want to change the color.
You don’t want to see, like, scratches on your phone.
For this purpose, we’re not gonna do it.
But, as so you know, you place it over there to cover over it.
See what the base does is, you just put the clip in.
This is, the base’s purpose is so you can rotate this.
And you put it on your waist to any side that you want.
It’s full 360.
And we’re gonna put this on now.
Just place it, it’s perfectly aligned to your phone.
Well, at this case, is the iPhone first generation.
And you just snap it until it fits perfectly.
Fits perfectly according to the phones that you have.
Just put this on, and you’re ready to go.
Now, there’s some question on how to remove this without actually breaking this.
At AccessoryGeeks.com we usually use the pry tool.
Again, I mention that this is available to purchase at AccessoryGeeks.com
So what we do is, it has like this really thin plastic part where you can actually scoop in plastic case.
Very easy, isn’t it?
And, walah you got it.
And this is Mario from AccessoryGeeks.com
Thank you for listening.