Wilson In-Building Wireless Cellular 60 dB Amplifier (801106)

Amplify signals for greater reception with the Wilson In-Building Wireless Cellular 60 dB Amplifier (801106)

The Wilson In-Building Wireless Cellular 60 dB Amplifier (801106) transmits and receives an improved wireless signal inside your home or building and requires no physical connection to your phone. This amplifier is designed for larger office buildings, warehouses and manufacturing facilities. The amplifier works with any cell phone or cellular data card. The Cellular 60 dB amplifier improves signals on the Cellular (824-894 MHz) band and works with Version, US Cellular, Cellular One, Alltel, Bell Canada, Telus, Cingular and all other Cellular carriers.

How it works
Wilson amplifiers are small, portable, bi-directional devices that deliver service levels consistent with what would be expected in areas of high cell network coverage. They amplify a weak or shadowed signal in mobile, marine and in-building applications. When using a Wilson amplifier in conjunction with Wilson antennas, the outside antenna will collect the cell tower signal and send it through the cable to the amplifier. The signal is then amplified and broadcast from the inside antenna to the surrounding area. Cell phones and cellular data cards in that area then communicate with the improved signal. When a cell phone or cellular device transmits, the signal is received by the inside antenna, amplified by the amplifier and broadcast back to the cell tower through the outside antenna.

Wilson In-Building Wireless Cellular 60 dB Amplifier (801106) contains an amplifier and a power supply that plugs into a standard 120-volt wall outlet. You will also need at least one inside and one outside antenna and at least two lengths of coaxial cable to connect each antenna to the amplifier.

Installation Options:

Package includes

• Wilson In-Building Amplifier (801106)
• Power supply

Requirements (sold separately)

• Coaxial Cables
• Inside Antenna
• Phone adapters

	The Wilson 301103 Magnetic mount outside antenna is required, but one of the choices available for outside antennas.		The Wilson 301102 Glass mount outside antenna is required, but one of the choices available for outside antennas.
	The Wilson Dual Band Mirror Mount Trucker Antenna 301101 is required, but one of the choices available for outside antennas.		The Wilson Dual-Band Mini Magnet Antenna, 301113 is required, but one of the choices available for outside antennas.
	The Wilson 301124 Yagi Antenna is a required, but is one of the choices avilable for outside antennas.		The Wilson 301111 Yagi Antenna is a required, but is one of the available choices for outside antennas.

Antenna and Accessory Options (sold separately)

• Yagi 806-939 MHz Cellular Antenna (301111)
• Yagi 1800-1990 MHz PCS Antenna (301124)
• Low Profile Cellular Antenna (301106)
• Dual-Band Dome Antenna (301121)
• 20' Coax Cable (9913)
• 50' Coax Cable (9913)
• 2-Way Splitter (859901)

Wilson In-Building Wireless Cellular 60 dB Amplifier (801106) features

• Greater than 60dB computer controlled adjustable AGC dynamic range
• Automatic Gain Adjusting in the event of oscillation and/or overload
• 2dB Gain Steps (30 - 60dB)
• Automatic shutdown on overload
• Uplink squelch (optional)
• TIA/EIA-98-E 3.5.1 Receiver Sensitivity better than -110 dBm
• CDMA/rho > 0.912
• Wireless operation - no physical connection to cellular phone
• Maximum 3 Watts Output Power
• High Power Output Allows More Users on the System
• Increases signal strength in buildings for AMPS frequencies
  • 824-894MHz
  • Analog/Digital (CDMA, TDMA, GSM) (check compatibilities below)
  • 1900MHz band is unaffected/unamplified
• Allows multiple phones to be used simultaneously
• Increases your cellular phone's range
• Provides 9 times the coverage area of the 50dB Amplifier

Wilson In-Building Wireless Cellular 60 dB Amplifier (801106) specifications

• Part Number: 801106
• Frequency: 824-849 MHz, 869-894 MHz
• Gain: 60 dB
• Max Output Power: up to 3 watts
• Max RF: + 30 dBm / + 30 dBm
• Noise Figure: 3 dB nominal
• Isolation > 90 dB
• Power Requirements: 120 V AC / 3 A max
• Connectors: FME-Male 50 ohms
• Dimensions: 5.6 x 3.6 x 1.7(inches) / 14.2 x 9.1 x 4.4 (cm)
• Weight: 1.5 lbs / 0.7 kg

Benefits

• Requires no physical cable connection to your phone or cellular data card.
• The system can be used by multiple phones and cellular data cards.
• Works with all cell phone and cellular data card models.

Wilson In-Building Wireless Cellular 60 dB Amplifier (801106)

Order the Wilson In-Building Wireless Cellular 60 dB Amplifier (801106) today! Don't miss out on this great deal with Free Shipping. The Wilson In-Building Wireless Cellular 60 dB Amplifier (801106) is ready to be shipped within 24-48 hours.

Let the Geeks Experts help you with any questions or concerns. Call us today at 1-866-433-5793 or email us at CS@AccessoryGeeks.com.

Buy the Wilson In-Building Wireless Cellular 60 dB Amplifier (801106) today at AccessoryGeeks.com

• Compatible with all 800MHz Cellular providers (CDMA, TDMA, GSM, Analog). For example, most Verizon, AT&T TDMA, Alltel, US Cellular and many more
• Not compatible with 1900MHz PCS (AT&T GSM, Sprint PCS, T-Mobile, Qwest)
• Not compatible with iDEN (Nextel, Southern LINC, Mike)
• Not compatible with 1700MHz AWS (T-Mobile US 3G)