Wilson In-Building Wireless PCS 60 dB Amplifier (801306)

Wilson In-Building Wireless PCS 1900MHz 60 dB Amplifier (801306)

Boost and increase your cell phone reception with this Wilson In-Building Wireless PCS 1900MHz 60 dB Amplifier (801306)! Wilson has been known for their durable and top quality products which has been brought by many and have enjoyed more chats with friends and family because Wilson's superb products have helped boost their cell phone signal strength. So where ever you are, as long you have one bar, this Wilson In-Building Wireless PCS 1900MHz 60 dB Amplifier (801306) will help you get stronger cell phone signals.

The Wilson Cellular Wireless Amplifiers allow one or more users to benefit from an outside antenna and amplifier without a physical connection to the cell phone. This eliminates the need for an external antenna connection on the cell phone.

The Wilson Cellular Wireless Amplifiers and Direct Connection Cell Phone Amplifiers perform comparably in urban situations. Both amplifiers transmit up to 3 Watts of power to the cell site and receive a signal as weak as -110dBm. For rural applications, the direct connect (inline) cell phone amplifier will perform better and is recommended.

Do you need custom designed amplifier system at your place? Fill out AccessoryGeeks Cell Phone Signal Site Survey right here.

Kit is best for: [ Home - Apartment - Office - Boat - RV ]

• Single Band 1900MHz Coverage for Metro PCS, AT&T, T-Mobile, Verizon Wireless & Sprint
• Wireless operation with multi user support
• Improve data card and broadband signals too
• No technical experience required - Plug-and-play style installation / AccessoryGeeks' Cell Phone Signal Booster Installation Guide provided
• Better signal mens longer battery life
• Attractive, sleek design
• FCC approved
• Model #: 801306

Optimal Operation Requirement for any Cell Phone Signal Boosters

• Distance of separation for Cell Phone Signal Booster
• Signal availability outside your home/office/warehouse (at least 1 or 2 bars, 3 bars to be optimal). Remember, no signal outside = no signal inside even with amplifier

Package Includes

• Wilson In-Building Wireless PCS 1900MHz 60 dB Amplifier (801306)
• Power supply

In order for amplifier to work properly, it will need a combination of other parts such as:

• Indoor antenna
• Outdoor antenna
• Cable connectors
• Cables
• Please refer to AccessoryGeeks Exclusive Cell Phone Signal Booster General Package Content Guide for more information

Antenna and Accessory Options (sold separately)

• Yagi 806-939 MHz Cellular Antenna (301111)
• Yagi 1800-1990 MHz PCS Antenna (301124)
• Low Profile Cellular Antenna (301106)
• Dual-Band Dome Antenna (301121)
• 20' Coax Cable (9913)
• 50' Coax Cable (9913)
• 2-Way Splitter (859901)

Need more help?

AccessoryGeeks Exclusive Cell Phone Signal Booster Installation Guide	AccessoryGeeks Exclusive Cell Phone Signal Booster General Package Content Guide

General specifications for Wilson In-Building Wireless PCS 1900MHz 60 dB Amplifier (801306)

A BRIEF INTRODUCTION

Reference [ CELL SIGNAL CALCULATOR ] & [ FAQ - A.G. AMPLIFIER'S GUIDE ]

What is the Distance of Separation required for a Cell Phone Signal Booster?

Distance of separation is the separation needed for an amplifier kit to work properly. If the distance of separation is too short, the amplifier kit will not work to its fullest potential. Think of it as microphone feedback; when you place a microphone too close to the speakers it will give you a screeching noise feedback. Keep in mind that a vertical separation (diagonally going up) helps shortened the total distance of separation required. Refer to the table below when designing your kit.

This particular kit requires at least 50ft of separation like shown on the diagram below:

Wilson In-Building Wireless PCS 1900MHz 60 dB Amplifier (801306)

TIDFV

Disclaimer:

Cell phone signal boosters only work in situations where there are traces of signals. Systems will not work if zero signals can be picked up.

Accessorygeeks.com is not responsible for loss or damages caused by delays in delivery from natural disasters, manufacturer delays, acts of war or other causes beyond our control.

Order the Wilson In-Building Wireless PCS 60 dB Amplifier (801306) today! Don't miss out on this great deal with Free Shipping. The Wilson In-Building Wireless PCS 60 dB Amplifier (801306) is ready to be shipped within 24-48 hours.

Let the Geeks Experts help you with any questions or concerns. Call us today at 1-866-433-5793 or email us at CS@AccessoryGeeks.com.

Buy the Wilson In-Building Wireless PCS 60 dB Amplifier (801306) today at AccessoryGeeks.com