Wilson SignalBoost Dual-Band 3-Watt Amplifier 811210

Get Good Ole' American Ingenuity With This Wilson Dual-Band Signal Boost Cellular/PCS Amplifier

Wilson SignalBoost Dual-Band 3-Watt Amplifier 811210

Tired of bad reception, dropped calls and carrier promises? Sure you are! With this Wilson Dual-Band Signal Boost Cellular/PCS Amplifier you will experience 10 times more power and never have to miss a call again. Wilson Electronics Inc. has been a leader in the wireless communications industry for nearly 40 years and has specifically designed this Wilson Dual-Banded Signal Boost Cellular/PCS Amplifier with a patent-pending Smart Technology™ that adjust power automatically based on your cellular carrier. The Wilson Dual-Banded Signal Boost Cellular/PCS Amplifier are American Made and can work with all phones under CDMA & GSM frequencies between 800 MHz to 1900 MHz. So whether you are a Verizon, Cingular, Sprint or T-mobile customer in the car, in your house or at work you will can always carry your portable Wilson Dual-Band Signal Boost Cellular/PCS Amplifier with you and have the peace of mind that only Wilson can deliver.

Complete Wilson dual-band wireless amplifier kit for use in cars, pickups or semis only! (can also be used for personal work space)

Installation Options:

• Option A (in car, Boat & RV): The inside antenna (interior low profile antenna) should be mounted 1 foot or less from where the phone is to be used. The best place to mount the inside antenna is shoulder height on the side of the drivers seat. The closer the inside antenna is placed to the phone, the better the performance. Do not mount the interior antenna within 4" of metal

• Option B: For convenience, the small mini antenna (359914) can be directly attached to the phone and will perform similar to an 811201 - Dual Band Direct Connect Amplifier. The mini antenna must be connected directly to the back of the phone using the included velcro. It must be located as close to the phone's antenna as possible. The mini antenna will not work when away from the phone as the interior low profile antenna will. Connect the mini antenna (359914) to the amplifier using the included 6' extension cable. NOTE: You can only use the included mini antenna (359914) - you absolutely must not directly connect the amplifier to the phone using any other adapter. Doing so will damage your phone.
• May also be used in conjunction with the Wilson Cellular Cell Phone Cradle Plus (the cradle would be used as the interior antenna)
• Option C (Personal work space at home or office): For personal workspace usage, make sure the inside antenna is roughly around 1-2 feet away from the your phone for the best coverage. A longer cable (951106) might be needed to connect the outside antenna to the amplifier due to the length of the inside antenna cable.

Package includes

• Wilson® SignalBoost™ Cellular Signal Amplifier
• Cigarette Lighter DC Power Supply
• Universal Connector
• Extension Cable

Requirements (sold separately)

• Coaxial Cables
• Inside Antenna
• Phone adapters

	The Wilson 301103 Magnetic mount outside antenna is required, but one of the choices available for outside antennas.		The Wilson 301102 Glass mount outside antenna is required, but one of the choices available for outside antennas.
	The Wilson Dual Band Mirror Mount Trucker Antenna 301101 is required, but one of the choices available for outside antennas.		The Wilson Dual-Band Mini Magnet Antenna, 301113 is required, but one of the choices available for outside antennas.
	The Wilson 301124 Yagi Antenna is a required, but is one of the choices avilable for outside antennas.		The Wilson 301111 Yagi Antenna is a required, but is one of the available choices for outside antennas.

Wilson SignalBoost Dual-Band 3-Watt Amplifier 811210 features

• Works on all generations of CDMA, TDMA, and GSM
• Allows multiple phones to be used simultaneously
• Allows cellular phone to operate properly with all types of modulations including CDMA
• Up to 3 watts maximum power
• Power control logic ensures maximum output power is within cellular standards
• US and Foreign Patent Pending
• Extends cell phone battery life
• Easy to install and use and its portable
• Increases data communication rates needed for 3G technologies
• Greatly reduces disconnects and dropouts
• Has up to 10 times more power than your cell phone
• Designed for all cellular systems: AMPS, CDMA, EDGE, GPRS, GSM and TDMA (not compatible with Nextel/iDEN) (check compatibilities below)
• Not compatible with 1700MHz AWS (T-Mobile US 3G) (check compatibilities below)
• Made in the U.S.A.
• 1-Year Manufacturer Warranty
• FCC Type Accepted

Wilson SignalBoost Dual-Band 3-Watt Amplifier 811210 specifications

• Part Number: 801201
• Frequency: 824-894MHz, 1850-1990MHz
• Gain (up/down): 40dB / 40dB
• Linear Output Power: +30dBm
• Max Output Power: 3 Watts (Cell Site Controlled)
• Max RF (up/down): +35dBm / +10dBm
• Noise Figure (down): 3dB Nominal
• Flatness: +/- 4dB
• Isolation: > 90dB
• Power Consumption: 6V, 0.5A - 1.5A (subject to Uplink Power)
• Connectors: FME Male, 50 Ohms
• Dimensions: 4.5 * 3.5 * 1.25 (inch)
• Weight: 1.5 lbs

Optional Contents (sold separately)

• Home/Office Accessory Kit 859940 (AC power adapter & window mount antenna bracket)
• Magnet-Mount Antenna 301103
• Wilson Yagi Antenna 301111
• Mini Magnet-Mount Antenna 301113
• Glass Mount Antenna 301102
• Trucker Mount Antenna 301101
• Soft Carrying Case 859909

Technical Support

Help may be obtained by contacting Wilson Electronics, Inc. at 1-866-294-4660 or tech@wilsonelectronics.com Monday through Friday between 7:00AM - 3:30PM Pacific Time.

FAQs - Click Here for more information on Antennas and Amplifiers

Disclaimer

*The Wilson Dual-Band Signal Boost Cellular/PCS Amplifier is not compatible with iDEN frequencies.
** The Wilson Dual-Band Signal Boost Cellular/PCS Amplifier do not contain an Antenna (Sold Separately)

Wilson SignalBoost Dual-Band 3-Watt Amplifier 811210

Order the Wilson SignalBoost Dual-Band 3-Watt Amplifier 811210 today! Don't miss out on this great deal with Free Shipping. The Wilson SignalBoost Dual-Band 3-Watt Amplifier 811210 is ready to be shipped within 24-48 hours.

Let the Geeks Experts help you with any questions or concerns. Call us today at 1-866-433-5793 or email us at CS@AccessoryGeeks.com.

Buy the Wilson SignalBoost Dual-Band 3-Watt Amplifier 811210 today at AccessoryGeeks.com

• Compatible with all 800MHz Cellular and 1900MHz PCS providers (CDMA, TDMA, GSM, Analog). For example, Verizon, Cingular, Alltel, US Cellular, Midwest Wireless, Cellular One, Western Wireless, Sprint PCS, T-Mobile, Qwest and many more.
• Not compatible with iDEN (Nextel, Southern LINC, Mike)
• Not compatible with 1700MHz AWS (T-Mobile US 3G)