Made for Manufacturers AIR Card Accessories

The Wilson NMO Outperforms the Competition. Engineered and Made in the USA Get Free Shipping available in USA.Up to 90% of the power on both transmit and receive is absorbed within a vehicle and the users head.

Wilson Dual-Band NMO Mount Antenna 301104

SKU: AEAW-301104

Be the first to review this product

You will earn 17 Geek Points for this purchase

What are geek points?

USD $16.95

REG $29.99

with Free Shipping

Quick Overview


  • Select a location for mounting the antenna. The best location would be centered on the roof, although other locations are acceptable.

  • Drill a hole in the selected location. Hole size will depend on the size of the NMO mount purchased.

  • Route the cable between the hole and phone location.

  • Place the NMO mount up through the bottom of the hole. Place threaded nut on top of the mount, outside of vehicle, and tighten.

  • Screw antenna coil into place on top of vehicle.

  • Screw FME connectors together between antenna mount cable and antenna adapter and connect adapter to cell phone.

Wilson Dual-Band NMO Mount Antenna 301104

More Views

  • Wilson Dual-Band NMO Mount Antenna 301104
  • Wilson Dual-Band NMO Mount Antenna 301104
  • Wilson Dual-Band NMO Mount Antenna 301104
  • Wilson Dual-Band NMO Mount Antenna 301104
  • Wilson Dual-Band NMO Mount Antenna 301104
  • Wilson Dual-Band NMO Mount Antenna 301104
  • Free Shipping to US & Canada
  • Best Price Guaranteed
  • 90 Days No Hassle Return

Features & Highlights

Why you should buy this product

The Wilson NMO Outperforms the Competition. Engineered and Made in the USA Get Free Shipping available in USA.Up to 90% of the power on both transmit and receive is absorbed within a vehicle and the users head. We solve this problem by channeling all the power from the cellphone to the outside antenna. This results in our NMO antenna transmitting and receiving over 10 times more signal than a cellphone used inside the vehicle without an outside antenna.

The Wilson NMO Cellular Antenna was carefully designed to minimize loss and maximize gain on both the 800 MHz and 1900 MHz bands. Wilson accomplished this by using a phasing coil and a low loss coaxial phase reversing device that provides high gain on both frequencies. Wilson's innovative design results in high efficiency with low losses and will get the most signal to your cellular phone. Thanks to these innovations and our attention to detail Wilson Electronics has the best performing NMO cellular antenna available.

Usage

The Wilson NMO Cellular Antenna requires a standard NMO mount (sold separately) and a phone adapter (also sold separately). Most NMO mounts are installed by drilling a hole in the roof of your vehicle. The cable is then routed under the headliner to the cellphones location. This provides for an excellent ground plane and very solid permanent installation.

Specifications

Electrical Properties:

Part #: 301104
Frequency Range: 806-894 MHz / 1850-1990 MHz
Impedance: 50 Ohms / Both Bands
Antenna Gain: 4.9dBi 806-894MHz / 5.9dBi 1850-1990MHz
System Gain: 10-15dB
Radiation: Omni
Polarization: Vertical
Wavelength: 1 @ 806-894MHz / 2.1 @ 1850-1990MHz
Ground Plane: Metal Ground Plane is Required

Mechanical Properties:

Material.....Whip - Stainless Steel
Height.......................13.88"
Mounts..............NMO Mount Types (sold separately) Wilson NMO Cellular Antenna Installation Instructions Antenna Installation Select a location for mounting the antenna. The best location would be centered on the roof, although other locations are acceptable. Drill a hole in the selected location. Hole size will depend on the size of the NMO mount purchased. Route the cable between the hole and phone location. Place the NMO mount up through the bottom of the hole. Place threaded nut on top of the mount, outside of vehicle, and tighten. Screw antenna coil into place on top of vehicle. Screw FME connectors together between antenna mount cable and antenna adapter and connect adapter to cell phone. Attaching your Phone to the Adapter (Sold Separately) In order to attach you cellular antenna to your cellphone you will need an Adapter. The Adapter connects the phone to the antenna cable and transfers power to and from the antenna. Click HERE for a list of available antenna adapters. FAQs - Click Here for more information on Antennas and Amplifiers.

You Might Also Be Interested

Customers Who Viewed This Item Also View

Customer Reviews

Be the first to review this product

Write Your Own Review

You're reviewing: Wilson Dual-Band NMO Mount Antenna 301104

  •  
    1 star
    2 stars
    3 stars
    4 stars
    5 stars

* Required Fields