Wilson Cellular Dual Band Wireless Amplifier Package, 801201

DO YOU HAVE SIGNAL PROBLEM?
We have solution for you.

Your Money Saving Chance!!!
Limited Stock!!!

Wilson Cellular Announces a New Dual Band Wireless Mobile Amplifier Package ($567 Value) with Smart Technology

Wilson Cellular Dual Band Wireless Amplifier Package, 801201

Wilson's Dual Band Wireless Mobile Amplifiers allow the benefit of an external antenna and up to 3 watt amplifier without a physical connection to the cell phone.

Installation Options:

Option A (in car, Boat & RV)

Option B (Personal work space at home or office): For personal workspace usage, make sure the inside antenna is roughly around 1-2 feet away from the your phone for the best coverage. A longer cable (951106) might be needed to connect the outside antenna to the amplifier due to the length of the inside antenna cable.

Includes:

Interior low profile antenna
Cigarette lighter power plug
6' Extension cable
Mini 'antenna' (359914)

Requirements (sold separately):

Exterior Cell Phone Antenna
Recommend Wilson Cellular Dual-Band Magnetic Mount antenna or NMO (through-the-roof) Mount antenna
Wilson Cellular Dual-Band Glass Mount antenna not recommended.

Wilson Cellular Dual Band Wireless Amplifier Package, 801201 features

Passes TIA/EIA-98-E Transmit test for evaluation CDMA Cellular Phones
Power Control Logic ensures maximum output power is within Cellular Standards
Allows multiple phones to be used simultaneously
Allows cellular phone to operate properly with all types of modulations including CDMA
Maximum 3 Watts output power
Designed for all cellular systems: AMPS, CDMA, EDGE, GPRS, GSM and TDMA (not compatible with Nextel/iDEN) (check compatibilities below)
Not compatible with 1700MHz AWS (T-Mobile US 3G) (check compatibilities below)
Automatic Gain Control
Overload Protection Circuit - Protects cell system from overload
Automatic Reset - if overload occurs
FCC Type Accepted

Wilson Cellular Dual Band Wireless Amplifier Package, 801201 specifications

Part Number: 801201
Frequency: 824-894MHz, 1850-1990MHz
Gain (up/down): 40dB / 40dB
Linear Output Power: +30dBm
Max Output Power: 3 Watts (Cell Site Controlled)
Max RF (up/down): +35dBm / +10dBm
Noise Figure (down): 3dB Nominal
Flatness: +/- 4dB
Isolation: > 90dB
Power Consumption: 6V, 0.5A - 1.5A (subject to Uplink Power)
Connectors: FME Male, 50 Ohms
Dimensions: 4.5 * 3.5 * 1.25 (inch)
Weight: 1.5 lbs

What are the benefits of our wireless Mobile Amplifiers?

The Wireless Amplifiers allow one or more users to benefit from an outside antenna and amplifier without a physical connection to the cell phone. This eliminates the need for an external antenna connection on the cell phone.

Wireless vs. Direct Connection?

The Wilson Wireless Amplifiers and Direct Connection Amplifiers perform comparably. Both amplifiers transmit up to 3 Watts to the cell site and receive a signal as weak as-110 dbm

Does the Wireless Mobile Amplifier affect a carrier's cell site?

Wilson's Wireless Mobile Amplifiers have Smart Technology that automatically adjusts the power based upon the cell site's requirements. This patent pending technology ensures that the power to the cell site is within the carrier's specifications

Tests show Wilson Cellular's Dual Band Wireless Mobile Amplifier Outperforms Digital Antenna and RF Engineered Solutions.

Wilson Wireless Mobile Amplifiers have Patent Pending Smart Technology that allow the amplifier to be "Transparent" on the carrier's system while improving coverage. Passed TIA/EIA-98-E Tx & Rx Tests

Receiver Sensitivity : -110.47 dBm on 800 MHz / 111.04 dBm on 1900 MHz
Maximum RF Output Power - Passed
Minimum Controlled Output Power - Passed
Package Content : Amplifier, magnet Mount Antenna, Stealth Antenna, 12V DC Power Supply ($569 Value)

*Disclaimer : Please allow extra time for manufacturer delays, rush times, or volume during holidays. Accessorygeeks.com shall not be responsible for loss or damage caused by delays in delivery from fire, strikes, weather, casualty, inability to obtain materials, manufacturer delays, acts of war or other causes beyond our control.

FAQs - Click Here for more information on Antennas and Amplifiers.