DO YOU HAVE SIGNAL PROBLEM?
We have a solution for you.
This is your Money Saving
Chance!!!
Limited Stock!!!
Note: Not for use with iDEN / Nextel
Frequency phones.
Free Shippingin the U.S.A!. The Wilson bi-directional cellular amplifier
/ repeater greatly improves signal strength inside a building when using
your cell phone. It does this without physical connection to your phone
allowing you to walk around freely during a call. It even allows multiple
phones to be used simultaneously.
The signal is received by the outside
antenna from the cell site. It is then amplified and repeated to your cell
phone through the inside antenna. When the phone transmits, the signal is
received by the inside antenna, amplified, then repeated to the cell site
via the outside antenna.
Requirements (sold separately)
- Increases signal strength
on send and receive in AMPS 824-894 MHz frequency range
- Wireless operation. No physical
connection to your phone is required.
- Allows multiple phones to be use
simultaneously.
- Works on AMPS frequency 824 - 894MHz
(Analog and Digital) CDMA, TDMA and GSM. (Amplifies 824-894 range,
1900MHz is unaffected)
- Your phone will use less battery power
for longer battery life*
- Two inside antennas can be used using
the Wilson 2 Way Splitter
Specifications
- Part Number:
801105
- Frequency:
824-849MHz Uplink 869-894MHz Downlink
- Gain:
(up/down): 50dB / 60dB
- Linear Output Power:
3 Watts
- Max RF (up/down):
+30dBm / +30dBm
- Noise Figure (down):
3dB nominal
- Flatness (up/down):
+/-2.5dB
- Isolation:
Uplink/Downlink More than 90dB
- Power Consumption:
120 V AC, 225 MA MAX
- Connectors: N-Female
- Dimensions:
4.5 x3.5x 1254 (inch) or 14.0 x 10.8 x 3.5 (cm)
- Weight:
1.5lbs
For more information about
Installation and Specifications, check out the Wilson Brochure below:

FEATURES
- Maximum 3 Watts Output Power
- High Power Output allows more Users on the
- Automatic Reset - if overload occurs
- Low Cost Solution with Uncompromised Performance
- Increases signal strength on send and receive in AMPS
824-894 MHz frequency range
- Wireless operation. No physical connection to your phone is required.
- Allows multiple phones to be use simultaneously.
- Works on AMPS frequency 824 - 894MHz (Analog and Digital)
CDMA, TDMA and GSM. (Amplifies 824-894 range, 1900MHz is unaffected)
- Your phone will use less battery power for longer battery life*
*A cell phone using our amplifier is safer
and will use less battery power because the phone thinks it's much closer
to a cell site than it actually is. Phones vary their power output based
on their proximity to cell sites. Therefore, your phone transmits less
power - resulting in safer use and longer battery life.
Note: Expedited shipping not available due to larger packaging requirements and weight.
Technical Support
Help may be obtained by contacting
Wilson Electronics, Inc. at 1-866-294-4660 or tech@wilsonelectronics.com
Monday through Friday between 7:00AM - 3:30PM Pacific Time.
FAQs - Click
Here for more information on Antennas and
Amplifiers.
Order the Wilson 50dB In-Home Bi-Directional Amplifier Only, 801105 today! Don't miss out on this great deal with Free Shipping. The Wilson 50dB In-Home Bi-Directional Amplifier Only, 801105 is ready to be shipped within 24-48 hours.
Let the Geeks Experts help you with any questions or concerns. Call us today at 1-866-433-5793 or email us at CS@AccessoryGeeks.com.
Buy the Wilson 50dB In-Home Bi-Directional Amplifier Only, 801105 today at AccessoryGeeks.com