Wilson 50dB 800Mhz In-Home Amplifier Package 801105
Wilson 50dB 800Mhz In-Home Amplifier Package 801105 Benefits & Features
Dropped calls? Boost and increase your cell phone reception with this complete system: Wilson 50dB 800Mhz In-Home Amplifier Package 801105! Wilson has been known for their state of the art wireless communication technologies which have improved and changed the quality of conversation for countless numbers of people. All Wilson Electronic's products are engineered and manufactured in the U.S.A.
Whether you're at home or at the office, as long as there is low signals, the Wilson 50dB 800Mhz In-Home Amplifier Package 801105 provides a sizable indoor coverage for most home and office environments.
Do you need custom designed amplifier system at your place? Fill out AccessoryGeeks Cell Phone Signal Site Survey right here.
Kit is best for:
[ Small Office - Personal Area - Living Room ] 
- 800Mhz Band only!(Verizon Wireless)
- Wireless operation with multi user support
- Improve data card and broadband signals too
- No technical experience required - Plug-and-play style installation / AccessoryGeeks' Cell Phone Signal Booster Installation Guide provided
- Better signal mens longer battery life
- Attractive, sleek design
- FCC approved
- Model #: 801105
Optimal Operation Requirement for any Cell Phone Signal Boosters
- Distance of separation for Cell Phone Signal Booster
- Signal availability outside your home/office/warehouse (at least 1 or 2 bars, 3 bars to be optimal). Remember, no signal outside = no signal inside even with amplifier
INSTALLATION DIAGRAM
|
|
Wilson 50dB 800Mhz In-Home Amplifier Package 801105 Package includes
1x Indoor Dome Antenna (301121)
1x Wilson Bi-Directional Amplifier (801105)
1x Outdoor Yagi Antenna (301111)
1x Wilson 952330 30' WILSON400 Ultra Low Loss Coax Cable
1x Wilson 952320 20' WILSON400 Ultra Low Loss Coax Cable- All mounting hardware
- AC power supply
Need more help?
General specifications For Wilson 50dB 800Mhz In-Home Amplifier Package 801105
| Product Reference |
801105 |
| Frequency: |
US Cellular 800/850 MHz Band
Uplink: 824 - 849 MHz
Downlink: 869 - 894 MHz |
| Gain (up/down): |
50dB / 50dB |
| Linear Output power: |
+30dBm maximum |
| Oscillation Control: |
20-50dB Amplifier Automatic Gain Control (AGC)
2db gain steps
Automatic shutdown on overload |
| Max Output Power: |
3 Watts |
| Max RF (up/down): |
+30dBm / +30dBm |
| Noise Figure (down): |
3dB Nominal |
| Flatness (up/down): |
+/- 2.5dB |
| Isolation: |
> 90dB |
| Power Consumption: |
120V AC, 3 A max |
| Connectors: |
N/Female, 50 Ohms |
| Dimensions: |
5.6 x 3.6 x 1.7 (inches) |
| Weight: |
1.5 lbs amp only |
Reference [ CELL SIGNAL CALCULATOR ] & [ FAQ - A.G. AMPLIFIER'S GUIDE ]
What is the Distance of Separation required for a Cell Phone Signal Booster?
Distance of separation is the separation needed for an amplifier kit to work properly. If the distance of separation is too short, the amplifier kit will not work to its fullest potential. Think of it as microphone feedback; when you place a microphone too close to the speakers it will give you a screeching noise feedback. Keep in mind that a vertical separation (diagonally going up) helps shortened the total distance of separation required. Refer to the table below when designing your kit.
Amplifier Type |
Distance of Separation |
Best Application |
Look for these icons |
40dB |
5-10 feet |
Car or desk space |
|
45dB |
5-15 feet |
Car, truck, or desk space |
|
50dB |
25-45 feet |
Small office, 1 room in the house, trailers, or boat
|    
|
55dB |
45-55 feet |
Small office, 1 room in the house, trailers, or boat |
|
60dB |
50-60 feet |
Office, large room, small warehouse |
|
62dB |
60-70 feet |
Office, large room, small warehouse |
|
65dB+ |
70-100 feet |
Large office, mansions, or warehouse |
|
This particular kit requires at least 40ft of separation like shown on the diagram below:
Wilson 50dB 800Mhz In-Home Amplifier Package 801105
TIDFV
Disclaimer:
Cell phone signal boosters only work in situations where there are traces of signals. Systems will not work if zero signals can be picked up.
Accessorygeeks.com is not responsible for loss or damages caused by delays in delivery from natural disasters, manufacturer delays, acts of
war or other causes beyond our control.
Wilson 50dB 800Mhz In-Home Amplifier Package 801105
Order the Wilson 50dB 800Mhz In-Home Amplifier Package 801105 today! Don't miss out on this great deal with Free Shipping. The Wilson 50dB 800Mhz In-Home Amplifier Package 801105 is ready to be shipped within 24-48 hours.
Let the Geeks Experts help you with any questions or concerns. Call us today at 1-866-433-5793 or email us at CS@AccessoryGeeks.com.
Buy the Wilson 50dB 800Mhz In-Home Amplifier Package 801105 today at AccessoryGeeks.com
